Nexo RS18 Sub Bass Loudspeaker

KShs105,000.00

Nexo RS18 Sub Bass Loudspeaker

The RS18 applies NEXO’s patent-pending RAY SUB technology in a 2 x 18″ subwoofer format. RAY SUB technology optimizes the positioning and phase relationships of radiating surfaces in vented enclosures, permitting acoustic distance from rear to front sections to always increase as frequency decreases.
Consequently, rear and front sections sum up efficiently over the entire subwoofer bandwidth, allowing for an average of 5db gain from the rear section in the forward direction and cancelling in the rear direction.
Nexo RS18

KShs105,000.00

Add to cart
Buy Now

Nexo RS18 Sub Bass Loudspeaker

RS18

The RS18 uses two 18″ long excursion Neodymium drivers in a low profile cabinet to extend system response down to 30Hz. NEXO’s patent pending RAY SUB Technology is based on optimising the positioning and phase relationships of radiating surfaces in vented enclosures, permitting acoustic distance from rear to front sections to always increase as frequency decreases.

Consequently, rear and front sections sum up efficiently over the entire subwoofer bandwidth, allowing for an average of 5dB gain from the rear section in the forward direction and cancelling in the rear direction.

KEY FEATURES

  • Low profile, high output, modular scalable bass
  • Configurable directivity pattern
  • Cardioid pattern reduces rear levels by minimising rear/side wall reflections
  • Aerodynamically profiled vents with 20db noise reduction and improved linearity at high SPL
  • Frequency response 30Hz – 100Hz
  • Sensitivity 105dB
  • 2 x 18″ configuration
  • Applies across the entire NEXO Product Line

SPECIFICATIONS

Omni Directional
Frequency Response @ -3db [a] 30Hz–100Hz 30Hz-100Hz
Usable Range @ -6db [a] 29Hz–250Hz 29Hz–150Hz
Sensitivity 1W @ 1m [b] 105dB SPL Nominal 103dB SPL Nominal
Peak SPL @ 1m [b] 143–146dB Peak 140–143dB Peak
(2x1000W to 2 x 2000W/8Ω) (2x1000W to 2 x 2000W/8Ω)
Dispersion Omni & Directional pattern over the entire useable bandwidth depending on controller
Directivity Index [c] 1.5 < Q < 2 1.7dB < DI < 3dB Q=4.3 DI=5.3dB
Crossover Frequency From 75Hz to 100Hz From 75Hz to 100Hz
Nominal Impedance 2 x 8Ω 2 x 8Ω
Recommended Amplifiers One amplifier channel is required for Omni mode operation, rated at 2000 to 4000 Watts into 4Ω Two amplifier channels are required for Directional mode operation, each rated at 1000 to 2000 Watts into 8Ω

FEATURES

Components 2 x 18″ (46cm) long excursion neodymium 8Ω drivers
Height x Width x Depth 520 x 1403 x 732mm (20.46″ x 55.24″ x 28.81″) with handles (touring version)
520 x 1238 x 732mm (20.46″ x 48.75″ x 28.81″) without handles (install version)
Shape Rectangular
Weight Net Weight 90Kg (199 lbs)
Net Weight with handles 105Kg (231.5 lbs)
Net Weight with rigging system 126Kg (278 lbs)
Connectors 4 x NL4MP SPEAKON 4 pole on two connection plates (In & Through)
Construction Baltic Birch plies finish with textured black or white coating. A dark grey carpet finish is also available.

[a] Response curves and data: anechoic far field above 200 Hz, half-space anechoic below 200 Hz.

[b] Sensitivity & peak SPL: will depend on spectral distribution. Measured with band limited pink noise.
Refers to the specified +/- 3 dB range. Data are for speaker + processor + recommended amplifier combinations.

[c] Directivity curves and data: 1/3 octave smoothed frequency response, normalized to on-axis response. Data obtained by computer processing of off-axis response curves.

On the market for a new PA speaker system? Then you’ve come to the right place! Order at drumbeatssounds now and you will not regret it. The public address system prices in Kenya at drumbeatssounds is pocket friendly.
The pa speakers price in Kenya is very affordable at drumbeatssounds and is recommended when you want loud output.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Us now