Hartke VX3500 Bass Combo Detail

The Hartke combo combines the best selling classic Hartke 3500 amp with a killer Hartke speaker cabinet loaded with four 10″ Hartke VX speakers and a high frequency driver.

The Hartke VX3500 provides 350 watts of power to the built-in 2-way bass speaker system. With that kind of power and Hartke‘s custom designed transducers, the VX3500 is extremely live and punchy. In addition, the VX3500 offers a number of additional advanced features, including front panel compression and graphic equalizer LED indicators, effects send and return jacks, an effects send/return balance knob and a direct output with ground lift and pre or post EQ selection.

With excellent power and tone, the VX3500 is ideal for live performance use in small and medium-size venues. Additionally, its advanced preamp features make it perfect for use in recording environments. And with solid cabinet construction, heavy-duty casters and recessed side handles, the VX3500 is made for the road, ensuring reliable, professional performance night after night.

Hartke VX3500 Overview

The Hartke VX3500 4×10″ Bass Combo with 1″ High-Frequency Speaker combines the Hartke 3500 amp with a Hartke speaker cabinet loaded with four 10″ Hartke VX speakers and a high frequency driver. The VX3500 provides 350W to the built-in 2-way bass speaker system.

panel compression and graphic equalizer LED indicators

The VX3500 features front panel compression and graphic equalizer LED indicators, effects send and return jacks, an effects send/return balance knob and a direct output with ground lift and pre or post EQ selection. This combo is designed for use in small and medium-size venues as well as in recording environments. The VX3500 also features solid cabinet construction, heavy-duty casters and recessed side handles.

VX3500 amplifier section with 350W delivered to its internal 4 ohms speaker system

Amp section features tube and solid state preamps, bass, treble and contour controls, 10-band graphic EQ and variable compression

Cabinet features 4 x 10″ traditional paper cone drivers and a high frequency compression driver

Solid braced cabinet construction, recessed side handles, and heavy duty casters

Hartke VX3500 Features

3500 amplifier section with 350 watts delivered to its internal 4 ohm speaker system
Amp section features tube and solid state preamps, bass, treble and contour controls, 10-band graphic EQ and variable compression
Cabinet features 4 x 10″ traditional paper cone drivers and a high frequency compression driver
Solid braced cabinet construction, recessed side handles, and heavy duty casters

Hartke VX3500 Specs

Connectors	Front Panel: 1x 1/4″ phone jack, Passive input 1x 1/4″ phone jack, Active input Rear Panel: 1x IEC AC input 1x 1/4″ phone jack, Speaker output 1x 1/4″ phone jack, Effect send 1x 1/4″ phone jack, Effect return 1x XLR, Direct out jack
Controls	Front Panel: 1 x Pre-amp A tube control knob 1 x Pre-amp B solid state control knob 1 x Compression control knob 1 x Graphic EQ In/Out switch 10 x Graphic EQ control slide 1 x Contour low pass control knob 1 x Contour high pass control knob 1 x Master volume control knob 1 x Power switch Rear Panel: 1 x Balance control knob 1 x Direct output post/pre switch 1 x Direct output normal/ground lift switch
Input Sensitivity	Passive: 100 kOhms, 20 mV Active: 100 kOhms, 60 mV
Rated Output Power	350 W @ 4 ohms
Total Harmonic Distortion (THD)	Less than 0.5%
Signal to Noise Ratio	Approx 78 dBm
Equalizer	Contour low pass: ± 18 dB @ 100 Hz Contour high pass: ± 18 dB @ 10 kHz Ten-band graphic: ± 15 dB, center detented @ 30 Hz, 64 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 3 kHz, 5 kHz, and 8 kHz
Compression Ratio	2:1 to infinity
Output Level	0 dBm (send)
Input Level	0 dBm (return)
Impedance	4 ohms
Low Frequency Drivers	4 x 10″ special design 16 ohms, 100 W speakers
High Frequency Driver	1″ Throat compression driver
Dimensions	29.75 x 25.5 x 15″ (75.5 x 64.8 x 38.1 cm)
Weight	106 lb (48.1 kg)